News

Anodic oxidation refers to the electrochemical oxidation of metals or alloys. It is the process whereby an oxide layer forms on aluminum products (the anode) under the influence of an external current, using appropriate electrolytes and specific process conditions. Unless otherwise specified, anodic oxidation typically denotes sulfuric acid anodic oxidation. To overcome limitations in surface hardness and wear resistance of aluminum alloys, expand application scope, and extend service life, surface treatment technology has become indispensable in aluminum alloy applications. Among these, anodic oxidation stands as the most widely adopted and successful technique. As a leading manufacturer of aluminum alloy door and window hardware in China, BOGO naturally employs anodic oxidation extensively in its surface treatment processes. But why do BOGO products, despite using the same anodizing process, offer longer service life, enduring performance that withstands time and environmental challenges, while being slightly more expensive than standard anodized products? Let's address these questions today!   First, why do BOGO products achieve superior coating quality, higher performance levels, and extended lifespan despite using the same anodizing process? Why do similar anodized products on the market vary so much in quality? This is due to several key factors: 1. Mold Differences: BOGO utilizes all-aluminum fixtures for anodic oxidation and electrolytic coloring. These fixtures significantly enhance oxidation richness and coating thickness during the process, ensuring superior performance after anodization. Most anodized products on the market, however, use titanium molds. This leads to significant loss during the anodic oxidation process, making it impossible to meet high-quality standards.   2. Differences in Anodizing Time: BOGO products undergo a 60-minute deep anodizing process to achieve a coating count exceeding 20, ensuring premium quality. Standard anodizing processes typically only last 20 minutes, resulting in insufficient coating thickness.   3. Coloring Process Differences: BOGO products employ an electrolytic coloring process, with each coloring cycle lasting 15 to 20 minutes to allow thorough reaction and coloring. This ensures rich, vibrant hues and a textured finish. Most products on the market use natural coloring, which takes only a few minutes and may result in uneven coloring and color deviations.   4. Sealing Material and Time Differences: BOGO products utilize imported sealing agents from Japan's OKUNO brand, with a sealing duration of 20 minutes to fully ensure product durability and abrasion resistance. In contrast, ordinary anodized products on the market often employ sealing agents of varying quality, with sealing times typically lasting only a few minutes, making it difficult to guarantee long-term product durability.     In summary, this explains why BOGO's anodizing process surpasses comparable products in the market. It also accounts for BOGO's slightly higher pricing, as the brand invests more in time, materials, and craftsmanship to consistently deliver premium quality and enduring durability.   BOGO remains steadfast in its commitment to delivering high-quality, high-standard products as its enduring pursuit. BOGO enables the global door and window industry to experience BOGO's intelligent manufacturing.

Today, Bogo Hardware, a leading domestic brand of high-end hardware accessories, officially launched its revolutionary product, the PARALL side-pressure hardware window and door system. As an innovative masterpiece in the field of window and door hardware, the PARALL system features side-pressure multi-point locking technology at its core, integrating high-strength materials and humanized design to provide a comprehensive solution that is safer, quieter, and more durable for modern building windows and doors, ushering in a new era of window and door performance.  Disruptive Technology: Side-Pressure Multi-Point Locking, Comprehensive Performance Upgrade Traditional window and door hardware systems typically rely on a single locking point. In contrast, the PARALL system innovatively adopts a side-pressure multi-point interlocking locking structure, significantly enhancing the overall performance of windows and doors through balanced force distribution at multiple points.  Superior sealing performance: When closed, the side pressure lock points tighten simultaneously, achieving a 360° seamless fit between the window sash and the frame. The windproof, waterproof and sound insulation performance is enhanced by over 40%, making it easy to handle typhoons, heavy rain and urban noise environments.  Ultimate load-bearing capacity: Utilizing aviation-grade high-carbon steel lock bodies and precision transmission components, the single-point load-bearing capacity exceeds 200kg, and the system has passed 100,000 opening and closing tests, meeting the strict requirements of oversized doors and windows.  Security protection upgrade: Hidden anti-pry structure + multi-point locking design, combined with internationally certified anti-theft lock core, comprehensively resist violent damage, safeguarding home security.  Four core selling points, directly addressing industry pain points "One-click adaptation" for flexible installation The PARALL system features an innovative modular design, supporting rapid adaptation to window frame thicknesses ranging from 60 to 120mm. It can be compatible with various profiles such as thermal break aluminum and aluminum-wood composite without customization, increasing installation efficiency by 50% and reducing construction costs.  Silent Experience Evolved Equipped with high-molecular nylon damping bearings and sound-absorbing rubber strips, the opening and closing process is nearly silent, making it especially suitable for bedrooms, studies, high-end hotels, and other scenarios with strict requirements for silence.  Minimalist aesthetic design Hidden lock points and streamlined handles (available in 6 colors such as matte black and champagne gold) seamlessly blend into modern architectural styles, balancing functionality with a high-end visual appeal.  Intelligent Connectivity Expansion Reserves interfaces for smart sensors, enabling seamless integration with smart home systems such as door and window status monitoring and automatic window closing in response to wind and rain, to meet the demands of future smart buildings.  Full coverage of application scenarios, empowering the value of buildings The PARALL system, with its outstanding performance and wide adaptability, has been successfully applied to:  High-rise residential buildings: Wind pressure resistance performance reaches the highest level 9 of the national standard, providing safety protection for users in coastal areas and high-rise buildings.  Green energy-saving buildings: Superb sealing performance helps reduce air conditioning energy consumption and meets international certification standards such as LEED and BREEAM.  Commercial spaces: Silent design enhances the customer experience in office buildings and hotels, while the minimalist appearance aligns with the high-end commercial aesthetic.  Baogao Hardware: Driving the Future of the Industry with Innovation As a national high-tech enterprise, Baogao Hardware has been deeply engaged in the field of window and door hardware for 18 years and holds over 200 technical patents. The release of the PARALL system marks Baogao's strategic upgrade from a "component supplier" to a "window and door system solution service provider". In the future, Baogao will continue to focus on user needs and drive the high-quality development of China's window and door industry through technological innovation. 

In the era of rapid development of science and technology, BOGO Hardware stands out with its outstanding product innovation characteristics and has become a leader in smart accessories and high -end doors and windows hardware markets. The company closely follows the national intelligent building development policy, thoroughly integrates advanced technologies such as big data and artificial intelligence, and comprehensively improves product quality and user experience.  1. Smart accessories new era BOGO Hardware successfully builds a "smart factory" by constructing an intelligent manufacturing industrial system. This system introduces intelligent CNC devices, combined with big data and artificial intelligence technology, to realize the intelligent, standardized and large -scale production of the product, significantly improves production efficiency and market competitiveness. A. Intelligent production  : Intelligent factories can achieve real -time monitoring and intelligent scheduling through the connection of production equipment, sensors and control systems through IoT technology. Highly automated production process greatly reduces labor costs and errors. https://www.bogo-hardware.com/aluminium-alloy-sliding-door-lock/63046616.html B. Big data analysis  : The company uses big data technology to analyze the massive data in the production process, optimize the production process, and improve product performance. At the same time, accurately grasp market trends and consumer demand, quickly respond to market changes, and launch new products that are more in line with user needs. C. Intelligent empowerment  : Bogo Hardware products have intelligent perception and autonomous learning ability through artificial intelligence technology. For example, smart door locks can achieve fast and safe authentication through face recognition and fingerprint recognition technology.    2. Development of high -end products With the improvement of living standards, the market demand for energy saving, environmental protection, safety and durability of doors and windows has increased. BOGO Hardware is committed to developing high -end doors and windows hardware products and promoting the industry to moving towards high -end markets. A. Energy -saving and environmental protection  : The company uses advanced energy -saving materials and design concepts to effectively reduce energy consumption and reduce environmental pollution. For example, the smart window system can automatically adjust the energy saving effect according to the indoor and outdoor temperature and light changes. B. Security and reliable  : Bogo Hardware attaches great importance to product safety, and adopts high -strength materials and multiple safety protection mechanisms. Its high -end door and window hardware products have excellent anti -impact and anti -theft performance, creating a safe and reliable living space for users. C. Toply durable  : The company strictly controls the material selection and production process to ensure the long -term stable operation of the product and reduce the frequency of maintenance and replacement. D. Intelligent control  : Combined with the Internet of Things and artificial intelligence technology, BOGO HARDware's high -end door and window hardware products have intelligent control functions. Users can remotely control through mobile apps or voice assistants to enjoy the convenience and comfort brought by intelligentization. https://www.bogo-hardware.com/aluminium-alloy-sliding-door-lock/62979230.html BOGO Hardware has led industry development with its innovative advantages in smart accessories and high -end doors and windows hardware products. In the future, the company will continue to adhere to scientific and technological innovation, provide global users with more intelligent, safer, and more environmentally friendly high -quality products, and promote the development of smart buildings and smart home industries.   https://www.bogo-hardware.com/aluminium-alloy-swing-door-handle/62976503.html https://www.bogo-hardware.com/aluminium-alloy-sliding-window-lock/62979165.html

  bogo Hardware, a focus on door and window hardware accessories R & D, production and sales of the brand, since its establishment in 1999, always uphold the”heart to do door and window hardware” , the pursuit of excellence, has won the industry’s wide praise and high recognition of customers. In 2024, bogo Hardware will set sail again and take a series of innovative measures to promote the brand to a new peak. Innovation leads, wisdom builds the future. With 22 years of profound accumulation, bogo Hardware constantly breaks through technical barriers and integrates intelligence and personalization into product design.    At the 2024 Guangzhou Construction Expo, bogo Hardware exhibited the latest research and development of intelligent casement window system hardware, sliding door window lock series and a variety of flat door lock series. These products are not only beautiful in appearance, but also achieve a qualitative leap in function, and can perfectly integrate a variety of scenarios required by users every day to provide one-stop door and window hardware solutions.     An endless stream of visitors praised the innovative products of bogo Hardware and expressed their recognition. Quality based, exquisite workmanship. Every product of bogo Hardware has undergone rigorous testing and inspection to ensure that every link from raw material selection to surface treatment meets international standards. In the laboratory of bogo Hardware, each new product has to undergo 1,000 hours of salt spray testing, 1,000 hours of UV resistance testing, and 100,000 times of opening and closing testing to ensure corrosion resistance, stability and durability of the product. It is this strict requirement for quality that makes bogo Hardware stand firm in the industry and become the preferred brand in the hearts of customers. Brand upgrade, image refresh. 

In the tide of intelligent transformation of today's global manufacturing industry, China's door and window hardware manufacturers are actively embracing intelligent manufacturing and promoting the industry to move towards a more efficient and higher quality direction. Intelligent manufacturing has become an important development trend of China's door and window hardware industry, which not only significantly improves production efficiency and product quality, but also makes China's aluminum alloy door and window hardware products more competitive in the international market. In recent years, with the improvement of residents' living standards and the steady development of the real estate industry, the demand for door and window hardware products has shown a diversified and high-end trend. The market has put forward higher requirements for the durability, shock resistance, safety, corrosion resistance, energy saving, environmental protection, sound insulation and other properties of doors and Windows. The realization of these performance and requirements is closely related to the design and development of door and window hardware, which promotes the development of door and window hardware to the middle and high-end market. At the same time, with the growing demand for personalized decoration, customized products have become the new darling of the market.   In this context, China's door and window hardware enterprises have accelerated the pace of intelligent upgrading. Through the introduction of highly integrated, automated production systems, combined with digital manufacturing technology, these enterprises achieve precise control of production, effectively improve raw material utilization, production efficiency and product quality, and reduce production costs. Intelligent manufacturing not only meets the market demand for customized products, but also realizes the efficient production of mass-customized products.   Xingsan Xingyun Technology Co., Ltd. is a leader in the intelligent upgrading of China's door and window hardware industry. Founded in 1988, the company specializes in the manufacture and service of curtain walls, doors, Windows and door control hardware fittings. At present, the company has more than 800 sets of various kinds of automation equipment, and realizes automatic painting, automatic cleaning and grinding, automatic integrated stamping and other processes. In order to improve the efficiency and quality of the spraying process, the company invested more than 8 million yuan to introduce 4 fully automatic spraying and drying integrated production lines, which can produce 300,000 sets of spraying parts per day, and the coating thickness of the product is stable between 60 microns and 100 microns as stipulated in the national standard. In addition, the company also jointly developed and customized automatic assembly line and automatic slide stay assembly line with equipment manufacturers, and invested about 20 million yuan a year for research and development and transformation, accumulated 12 standard preparation, and obtained 152 national patents. The construction of smart factories not only improves production efficiency, but also brings a significant improvement in product quality. According to the data, enterprises that implement intelligent manufacturing can increase their production efficiency by 20% to 30%. Smart factories realize equipment interconnection through the Internet of Things technology, real-time monitoring of production status, timely adjustment of production plans, and avoid waste of resources. At the same time, enterprises can use big data analysis to optimize production processes and achieve fine management. The application of these technologies not only improves the production efficiency, but also reduces the production error rate and improves the product quality.   In the global market, the competitiveness of China's aluminum alloy door and window hardware products is increasing. With the advancement of intelligent manufacturing, China's door and window hardware enterprises have not only made significant progress in production efficiency and product quality, but also continue to innovate in customization, green energy saving, etc., to meet the international market's demand for high-quality, high-performance products. This not only enhances the international competitiveness of China's door and window hardware products, but also sets a model for the transformation and upgrading of China's manufacturing industry.   In the future, with the acceleration of the intelligent transformation of the global manufacturing industry, China's door and window hardware industry will continue to deepen the application of intelligent manufacturing, and promote the industry to develop in the direction of higher quality and higher efficiency. At the same time, Chinese door and window hardware enterprises will also actively expand the international market, strengthen cooperation and exchanges with international advanced enterprises, and jointly promote the intelligent upgrade and sustainable development of the global door and window hardware industry.

The 2024 US election is in full swing. This election not only affects the nerves of the domestic political economy of the United States, but also has a profound impact on the global economic landscape, including China's foreign trade, especially the door and window hardware industry. From the current international situation, the results of the US election will directly affect its foreign economic policy, and then affect the global trade environment. The two candidates, Trump and Harris, have their own opinions on trade policy. Trump advocates trade protectionism and tends to impose high tariffs on Chinese goods and restrict technology exports to maintain the domestic industry in the United States. Although Harris may continue the trade policy of the Biden administration, he will not relax the competition and restrictions on China in the high-tech field and manufacturing. Specific to the door and window hardware industry, small and medium-sized enterprises in this field may be greatly affected. If Trump is re-elected, his tough trade policy may lead to an increase in tariffs on door and window hardware products imported from the United States by China, thereby increasing the procurement costs of small and medium-sized enterprises and compressing profit margins. In addition, Trump's policy of promoting the return of manufacturing to the United States may also enable domestic door and window hardware manufacturers in the United States to receive more policy support and form more intense competition with Chinese companies. On the contrary, if Harris is elected, she may continue the trade policy of the Biden administration. Although it is unlikely to immediately ease the trade friction between China and the United States, the relatively mild policy may provide some respite for small and medium-sized enterprises. However, Harris also attaches great importance to the development of the United States in high-tech and emerging industries, which may lead to more intense competition between China and the United States in the fields of high-end technology and innovation in the door and window hardware industry. Faced with such a trend, how should China's small and medium-sized enterprises respond? First, small and medium-sized enterprises need to strengthen their independent research and development and innovation capabilities, and improve the technical content and added value of their products to cope with possible trade barriers and technological blockades in the United States. Through technological innovation, enterprises can develop more competitive products and reduce their dependence on the US market. Second, small and medium-sized enterprises should actively explore diversified international markets and reduce their risk exposure to a single market. Through cooperation with Europe, Southeast Asia and other regions, enterprises can diversify market risks and find new growth points. Third, small and medium-sized enterprises can strengthen cooperation with local American companies, and jointly develop the US market through joint ventures, mergers and acquisitions, and achieve mutual benefit and win-win results. This can not only reduce the impact of trade barriers, but also enable companies to better understand the US market demand and trends. Fourth, SMEs should also pay close attention to the policy direction after the US election and adjust their business strategies in a timely manner to cope with possible market changes. Through communication and cooperation with industry associations, chambers of commerce and other organizations, companies can better grasp market dynamics and policy trends and make more informed decisions. In summary, the impact of the US election on China's foreign trade imports of the US door and window hardware industry cannot be ignored. SMEs should actively respond to this trend, reduce risks and find new development opportunities by strengthening independent research and development, exploring diversified markets, strengthening international cooperation, and paying close attention to policy trends.

In recent years, the aluminum door and window hardware industry has shown a booming development trend.As a key component of modern buildings, aluminum door and window hardware not only concerns the safety and functionality of the building, but also directly affects the overall aesthetics of the building and the use of experience.With the acceleration of urbanization and the improvement of residents' living standards, aluminum door and window hardware industry has ushered in unprecedented development opportunities.   From the industry and market perspective, the demand for aluminum door and window hardware industry continues to grow.On the one hand, with the steady development of the real estate market, the demand for aluminum door and window hardware for new residential and commercial real estate projects is increasing.On the other hand, as consumers demand higher quality of home environment, the old house renovation and refurbishment market also shows great potential.According to relevant data, in recent years, the average annual demand for windows and doors of newly built commercial houses in the country is about 400 million square meters, while the renovation of second-hand houses and the old house renovation market is a huge potential, with an annual demand for new potential windows and doors of more than 100 million square meters. Aluminum doors and windows hardware industry in the market demand growth at the same time, is also facing fierce competition.A number of leading enterprises with brand influence and market share have emerged in the industry, which have won wide recognition in the market through independent research and development, technological innovation and brand building, and constantly improve product quality and service level.However, there are also numerous small and medium-sized enterprises (SMEs) in the market, which are relatively weak in terms of technology, capital and market channels, and are facing greater pressure for survival.In order to enhance their competitiveness, these enterprises continue to strengthen technological research and development, launch new products that meet market demand, and actively expand market channels to improve brand influence.From the customer's point of view, the customer demand in the aluminum door and window hardware industry presents diversified characteristics.On the one hand, customers' demand for the basic functions of aluminum door and window hardware is increasing, such as safety, durability, sealing and so on.On the other hand, with the rise of smart home, customers' demand for the intelligence of aluminum door and window hardware is also getting higher and higher.They hope that aluminum door and window hardware can have intelligent functions such as automatic sensing and remote control to enhance the convenience and safety of home life.In order to meet the diversified needs of customers, aluminum door and window hardware enterprises continue to strengthen their technological research and development and innovation capabilities.On the one hand, they improve the production efficiency and quality stability of products by introducing advanced production equipment and technology.On the other hand, they continuously optimize product design according to market demand and customer feedback, and launch new products that meet market demand.For example, some enterprises have launched intelligent door and window hardware products with automatic sensing and remote control functions, which meets customers' demand for smart home.Looking ahead, the aluminum door and window hardware industry will continue to maintain a vigorous development trend.With the acceleration of urbanization and the improvement of living standards of residents, the aluminum door and window hardware industry will usher in more development opportunities and challenges.Enterprises need to continuously strengthen technical research and development and innovation capabilities, improve product quality and service level to meet the diverse needs of the market and customers.At the same time, enterprises also need to strengthen brand building and market expansion, improve brand awareness and market influence, in order to be invincible in the fierce market competition.

With the successful conclusion of the BRICS meeting, economic cooperation and development from a global perspective have once again become the focus of heated discussion. As an important engine of world economic growth, cooperation among BRICS countries will undoubtedly bring unprecedented development opportunities to all walks of life. Especially in the door and window hardware industry, the market demand of BRICS countries and the in-depth advancement of the Belt and Road Initiative are providing a broader space for enterprises to expand foreign trade.   In recent years, my country's door and window hardware industry has made significant progress in technological innovation, product quality and service levels. With the continuous optimization of the international trade environment and the improvement of the competitiveness of domestic enterprises, the influence of door and window hardware products made in China in the international market is expanding day by day. The joining of BRICS countries, especially the influx of emerging market countries such as Saudi Arabia and Egypt, has brought more diversified demands to the industry and also raised higher challenges.   Facing the new market environment and opportunities, door and window hardware companies need to accurately grasp market dynamics and actively respond to changes in international trade rules. On the one hand, enterprises must increase investment in research and development and continuously improve the technological content and added value of products to meet the demand for high-quality products in overseas markets; on the other hand, enterprises also need to strengthen exchanges and cooperation with international counterparts to jointly promote the industry Establish and improve standards to achieve mutual benefit and win-win results.   It is worth mentioning that the promotion of the Belt and Road Initiative has provided strong support for the overseas layout of door and window hardware companies. By participating in international infrastructure construction, companies can promote high-quality products and services to a wider area and develop more customer groups. At the same time, the market demand of countries along the Belt and Road also provides enterprises with abundant business opportunities, helping to achieve rapid business growth and comprehensive market coverage.   Looking to the future, with the continuous deepening of cooperation among BRICS countries and the steady advancement of the Belt and Road Initiative, the foreign trade prospects of the door and window hardware industry will be broader. Enterprises should seize this historical opportunity, actively participate in international cooperation and exchanges, enhance their competitiveness, and contribute to achieving high-quality development of the industry and building a community with a shared future for mankind. Bogo's hardware products are nice quality to open the margin market, Because there are a lot of infrastructure projects in both developed and third world countries, this type of product will help you to gain better access to the local market. Door lock, Door lock handle, and door handle set could satisify different needs in new market.We are also looking for general agents for different countries and regions.

Recently, the well-known domestic door and window accessories manufacturer - bogo Company, officially announced its comprehensive development of overseas markets strategic plan. This initiative indicates that while consolidating its leading position in the domestic market, bogo has set its sights on a broader global market, aiming to provide global consumers with better quality door and window accessories products and services through technological innovation and quality improvement. In the context of the continuous growth of the global market size, Blocko is keen to capture the huge potential of overseas markets. Especially in emerging markets and developing countries, such as India, Brazil, Africa and other places, with the continuous advancement of infrastructure construction, the door and window accessories market has ushered in unprecedented development opportunities. With its deep accumulation and technical advantages in the field of door and window fittings, Blocko is determined to make great strides in this field. In terms of the competitive environment, Blocko is well aware of the complexity and diversity of overseas markets. Therefore, before opening up overseas markets, Blocko conducted in-depth market research and competition analysis to understand the consumer demand in different countries and regions, the market competition pattern and policies and regulations. On this basis, Blocko has formulated targeted product strategies and marketing plans to ensure that it can stand out in the fierce market competition. In terms of product strategy, bogo focuses on technological innovation and product research and development, and constantly introduces new products that meet market demand. At the same time, Blocko has also optimized its product line, retaining competitive products and eliminating outdated or low value-added products to ensure a streamlined and efficient product line. In addition, Blocko has strengthened product quality control to ensure that every product meets international standards and customer requirements. In terms of marketing, bogo makes full use of the Internet, exhibitions, social media and other channels for brand promotion and product promotion. By participating in internationally renowned door and window exhibitions, Blocko not only showcases its latest products and technological achievements, but also establishes extensive contacts and cooperation with customers and partners from all over the world. In addition, Blocko has also strengthened communication and cooperation with overseas distributors and end customers, providing timely and professional after-sales service and technical support. It is worth mentioning that in the process of developing overseas markets, Blocko has always paid attention to brand building and the spread of corporate culture. By providing high-quality products and services, Blocko has won the trust and praise of overseas customers, and gradually established a good brand image and reputation. At the same time, Blocko also actively participates in local public welfare activities and social responsibility projects, contributing to the development and progress of the local society. Looking forward to the future, bogo Company will continue to adhere to the "innovation, quality, service" corporate philosophy, continue to explore overseas markets, enhance brand influence and market competitiveness. Blocko believes that through continuous efforts and innovation, Blocko will become one of the leading enterprises in the global door and window accessories industry, providing more high-quality, safe and environmentally friendly door and window accessories products and services for consumers around the world.

Recently, Bogo, a well-known hardware system manufacturer, officially announced the grand launch of its latest masterpiece, the Inner-Swing Underhung Hardware System. With its excellent performance, exquisite craftsmanship and user-friendly design, the system redefines the standards of high-end door and window hardware accessories, and safeguards the safety and comfort of modern homes. Innovative design, flexible and changeable   The core highlight of Bogo’s newly launched inner-swing underhung hardware system lies in its highly modular and customizable design. The system is equipped with a TP square shaft transmission box and supports a variety of lock box center distance specifications. Users can flexibly choose according to actual needs to meet different door and window installation requirements. In addition, the system also uses a beautiful plastic decorative cover, which not only improves the overall aesthetics, but also has practical functions.   Excellent materials, durable and corrosion-resistant   In terms of material selection, Bogo insists on using high-quality materials to ensure the durability and stability of the product. The transmission parts are made of zinc alloy and are electroplated with zinc-nickel concave surface treatment, which effectively improves the corrosion resistance and ensures smooth and unobstructed long-term use. The high-precision gear design has been verified by 150,000 opening and closing tests, and its durability is excellent. At the same time, the system has also passed the 960-hour salt spray test, further proving its excellent anti-rust and anti-corrosion capabilities.   Safety protection, child-friendly   Safety has always been the primary consideration of the Baogao hardware system. The internal casement and underhang hardware system released this time is specially equipped with a child safety lock to effectively prevent children from accidentally opening the window, adding a guarantee for family safety. The base handle also incorporates the child lock design to make parents more at ease.   Convenient installation, efficient experience   In order to improve installation efficiency, the Baogao internal casement and underhang hardware system adopts a quick-install clamping plate design, and the installation process is simple and quick. The system's built-in 180° hidden diagonal rod and hidden lower hinge are not only beautiful and generous, but also have anti-pry and silent functions to ensure smooth and quiet opening and closing of doors and windows. At the same time, the lower hinge supports 180°/90° adjustable opening to meet the needs of different usage scenarios. The maximum opening angle can reach 180°, and the load-bearing capacity is up to 100kg, which fully demonstrates the powerful performance of the Baogao hardware system.   The launch of Baogao's internal flat opening and lower hanging hardware system not only marks another major breakthrough for Baogao in the field of door and window hardware accessories, but also brings a safer, more durable and convenient door and window experience to consumers. In the future, Baogao will continue to uphold the corporate philosophy of "innovation, quality, and service", continuously launch more high-quality products, and contribute more to modern home life.

In the context of continuous changes and upgrades in the door and window hardware accessories industry, Foshan bogo Aluminum Door and Window Accessories Co., Ltd. (hereinafter referred to as "bogo Company") has once again become a leader with its excellent product quality, strong technology research and development capabilities and forward-looking market layout The focus of the industry's attention. Today, bogo Company announced a series of important results and future plans, demonstrating its leading position and unlimited potential in the field of door and window hardware accessories. bogo Company has always regarded technological innovation as the core driving force for corporate development. Recently, the company has successfully developed a number of new door and window hardware accessories, which not only achieve a qualitative leap in performance, but also incorporate modern aesthetic elements into the appearance design, meeting the market's demand for high-quality, high-looking products. The launch of these new products not only consolidated bogo's leading position in the domestic market, but also laid a solid foundation for its expansion into the international market. In the domestic market, bogo Company has won the favor of many well-known door and window companies with its high-quality products and services, and has established long-term and stable cooperative relationships. At the same time, the company also actively expands emerging markets and subdivisions, and continuously broadens sales channels and customer groups. In terms of the international market, bogo Company closely follows the "One Belt, One Road" initiative and increases its efforts to develop overseas markets. Its products are exported to Southeast Asia, the Middle East, Africa and other countries and regions, and its brand influence continues to increase. In order to better serve global customers, bogo Company is accelerating its global layout. The company plans to set up branches or sales outlets in more countries and regions in the next few years to establish a more complete global sales and service network. At the same time, bogo Company will also strengthen cooperation and exchanges with internationally renowned companies, introduce advanced technology and management experience, and continuously enhance its international competitiveness. bogo Company never forgets to fulfill its social responsibilities while pursuing corporate development. The company actively participates in public welfare undertakings, pays attention to environmental protection, energy conservation and emission reduction, and is committed to achieving sustainable development. In addition, bogo Company also pays attention to employee growth and corporate culture construction, and strives to create a better working environment and development platform for employees. Foshan bogo Aluminum Door and Window Accessories Co., Ltd. is led by technological innovation and market demand-oriented, and continuously promotes product upgrades and market expansion. In the future, bogo Company will continue to adhere to the business philosophy of "quality first, customer first", accelerate the pace of globalization, and provide global customers with more high-quality, efficient, and environmentally friendly door and window hardware accessories products and services. We firmly believe that with the joint efforts of all employees, bogo Company will have a more brilliant future!

The US Federal Reserve (Fed) announced a rate cut on September 18, 2024, lowering the target range of the federal funds rate by 50 basis points to a level between 4.75% and 5.00%. This is the first rate cut since March 2020, marking the shift of US monetary policy from a tightening cycle to an easing cycle. This rate cut has certain benefits for the global economy, including China's foreign trade industry. First, the rate cut may reduce the US dollar exchange rate, thereby improving the international competitiveness of China's export products. Second, the downward trend in global interest rates may stimulate investment and consumption, thereby promoting global economic growth, which is also a positive signal for China's export market. However, the rate cut may also bring some uncertainties. For example, if the US economy enters a recession, it may affect global trade and investment activities. In addition, the rate cut may trigger changes in capital flows and pose a challenge to the stability of financial markets in emerging market countries. For Chinese foreign trade companies, they should pay close attention to the monetary policy trends of the Federal Reserve and changes in the global economy and financial markets. At the same time, enterprises should strengthen risk management, optimize product structure, improve product quality and added value to adapt to the changes in global market demand. In terms of specific operations, Chinese foreign trade enterprises can respond in the following ways: 1. Strengthen market research: deeply understand the changes in demand in the target market and adjust export strategies in a timely manner. 2.2. Improve product competitiveness: enhance product competitiveness in the international market through technological innovation and brand building. 3. Diversify markets: reduce dependence on a single market and open up new export markets. 4. Risk management: use financial instruments to hedge risks, such as futures and options. 5. Pay attention to policy trends: pay close attention to changes in domestic and foreign policies and adjust business strategies in a timely manner. The Fed's interest rate cut decision will have a profound impact on the global economy. China's foreign trade industry needs to be prepared to seize opportunities and meet challenges.

With the acceleration of the trend of building intelligence, the door and window hardware accessories industry is facing unprecedented market changes and "big reshuffle". Against this background, companies in the industry have actively responded to challenges and found new growth points through technological innovation and industrial upgrading.   Technological innovation: improve the level of product intelligence In the wave of building intelligence, door and window hardware accessories are an important part of the building, and their level of intelligence is directly related to the overall intelligent experience of the building. Therefore, technological innovation has become the key for the industry to respond to market changes. Many door and window hardware companies have begun to explore the application of cutting-edge technologies such as the Internet of Things, artificial intelligence, and big data in product research and development. By integrating smart components such as sensors and automated controls, door and window hardware products can not only realize basic functions such as remote control and automatic switching, but can also automatically adjust light, temperature, etc. according to indoor and outdoor environments, significantly improving the comfort and convenience of living and working. . In addition, the integration of intelligent security systems has also become a highlight in the door and window hardware industry. Through the application of biometric technologies such as facial recognition and fingerprint recognition, as well as the application of security equipment such as smart locks and anti-theft alarm systems, door and window hardware products provide comprehensive security for buildings. Industrial upgrading: Optimizing production processes and supply chain management Facing fierce competition in the market, the door and window hardware industry also needs to optimize production processes and supply chain management through industrial upgrading to enhance overall competitiveness. On the one hand, companies are increasing investment in automated and digital production lines, and improving production efficiency and product quality by introducing advanced production equipment and technology. At the same time, information technology means such as big data and cloud computing are used to conduct refined management of the production process to achieve optimal allocation of resources and effective cost control. On the other hand, companies also focus on optimizing supply chain management. By establishing a complete supplier management system and logistics distribution network, we ensure the timely supply and efficient distribution of raw materials and products. At the same time, we will strengthen cooperation and communication with upstream and downstream enterprises to jointly promote the coordinated development of the industrial chain. Green transformation: meeting the needs of green buildings With the continuous improvement of environmental awareness and the promotion and implementation of green building policies, the door and window hardware industry is also facing the urgent task of green transformation. Enterprises began to focus on the application of environmentally friendly materials and the research and development of energy-saving and emission-reduction technologies. Reduce the impact on the environment by selecting low VOC (volatile organic compounds), recyclable materials and adopting energy-saving and consumption-reducing production processes. At the same time, we develop and promote door and window hardware products with excellent heat insulation, heat preservation and noise reduction properties to meet the energy saving and environmental protection needs of green buildings. Under the trend of building intelligence, the door and window hardware accessories industry is facing unprecedented market changes and "big reshuffle". Through the implementation of measures such as technological innovation, industrial upgrading and green transformation, companies in the industry will continue to improve their competitiveness and achieve sustainable development. In the future, with the continuous advancement of technology and the continuous expansion of the market, the door and window hardware accessories industry is expected to usher in a broader development space.

In today's pursuit of quality of life, windows and doors as an important part of the home, its performance and aesthetics directly affect our living experience. However, when purchasing windows and doors, many consumers tend to focus only on the quality of glass and aluminum, but ignore the equally critical door and window hardware. In this article, we will discuss how to choose high-quality door and window hardware from the perspective of consumers to help you create a safer, more comfortable and durable home environment. First, recognize the importance of door and window hardware accessories   Door and window hardware accessories are small, but the role is huge, they include door locks, hinges, sliding rails, handles, wind braces, etc., is the key to the normal operation of doors and windows. High-quality hardware can ensure smooth opening and closing of doors and windows, sealing well, while enhancing the safety factor of the home. On the contrary, poor-quality hardware not only affects the use of experience, but also may become a safety hazard. Therefore, when choosing doors and windows, it is important to pay attention to the quality of hardware accessories.   Second, the selection of high-quality hardware accessories of the seven points   Material selection: high-quality hardware accessories are mostly made of stainless steel, aluminum alloy and other materials. Stainless steel corrosion resistance, high strength, is the production of door locks, handles and other parts of the ideal material; aluminum alloy lightweight, high strength, corrosion resistance, commonly used in the production of hinges, slides and other parts. Copper fittings are noble and elegant, but the price is high, suitable for the pursuit of high-end quality consumers. Matching specifications: The specifications of hardware accessories must match the models and sizes of doors and windows to ensure the installation effect and use experience. Before purchasing, consumers should have a detailed understanding of the models and sizes of their doors and windows. Brand reputation: choose well-known brands of hardware accessories, product quality and after-sales service is more guaranteed. Famous brands usually have perfect quality management system and after-sales service system, which can provide you with more reliable products and services. Surface treatment: Surface treatment is crucial to the life and beauty of the hardware fittings. Common surface treatment methods include electroplating, spraying, anodizing and so on. Consumers should choose the appropriate surface treatment according to the actual needs. Security: door locks are the first line of defense for home security, and locks with anti-prying and anti-sawing functions should be selected. At the same time, consider the actual needs of family members, such as the safety of the elderly and children. Durability: hinges, slides and other components need to withstand the weight of the doors and windows and frequent opening and closing actions, so we should choose good materials, reasonable structure of the product, to ensure that the long-term use of non-deformation, not jamming. Convenience and Intelligence: Modern home pursues intelligence and convenience, consumers can consider choosing door and window hardware with intelligent control functions, such as fingerprint locks, remote control switches, etc., in order to improve the quality of life. Third, example sharing: Ou Zhe doors and windows hardware accessories selection   Ou Zhe doors and windows as a leader in the industry, its choice of hardware accessories is extremely picky. The hardware accessories adopted by Ou Zhe include German original imported Goya hardware, Hobo handles and Belgian original imported Sobinko handles and other high-end brands. These fittings have gone through strict quality tests and matching tests to ensure the perfect integration with Ouzhe's doors and windows. Auzhe also works together with these famous brands to develop new products to ensure that the product performance reaches the best state.   When purchasing door and window hardware accessories, consumers should comprehensively consider the material, specifications, brand, surface treatment, safety, durability and convenience and other aspects. Only by choosing high-quality hardware accessories can we ensure the performance and life of doors and windows, and add a peace of mind and comfort to your home life. I hope this article can provide useful reference and help for consumers.

Recently, BOGO announced a series of major initiatives aimed at accelerating the expansion of its foreign trade market. As a global leading hardware solution provider, BOGO always adheres to the core concept of “Doing well in doors and windows with heart”, and is committed to providing high-quality and high-performance products and services to customers around the world. In order to more effectively develop foreign trade customers and expand new markets, Boco Hardware has taken a number of strategic actions. First of all, the company has thoroughly studied the needs and preferences of the target market to ensure that the products can accurately meet the needs of international customers. Through market research and data analysis, BOGO Hardware continuously optimizes the product structure, improves product quality, and develops products with more powerful functions, high durability, and exquisite appearance to meet the diversified needs of the international market.   In order to enhance brand awareness and exposure,BOGO Hardware actively builds diversified marketing channels. The company has increased its publicity on famous B2B platforms, the Internet and social media, and improved the brand's international influence and competitiveness through advertising and promotion, SEO ranking optimization and other means. At the same time,BOGO Hardware also participated in several domestic and international industry exhibitions, such as those in Guangzhou, Yunnan, Chengdu, etc. Through the exhibition platform, the company conducted in-depth exchanges with global customers, demonstrated the company's strength and product advantages, and further expanded the customer base.   In order to connect to the international market more directly, BOGO Hardware also actively seeks for foreign trade agency partners. By establishing cooperative relationship with experienced foreign trade agents, BOGO Hardware can enter new markets more quickly, understand local market dynamics and customer needs, and provide customers with closer services. In addition, the company also launched the CRM project to optimize the customer management system and improve the efficiency and management level of the sales system, which provides strong support for the expansion of foreign trade market. BOGO Door & Window Hardware always adheres to the principle of quality first in the process of expanding foreign trade market. From the beginning of design to the production of the factory, the company strictly follows the product standards and processes to ensure that each product reaches the international first-class level. It is this persistent pursuit of quality that has won BOGO Hardware a good reputation and credibility in the international market.   Looking into the future, BOGO Door & Window Hardware will continue to uphold the original intention, adhere to the manufacturing principle of “Doing well in Door & Window Hardware with all our heart”, take “Let the world door & window industry enjoyBOGO Intelligent Manufacturing” as the brand vision, and continuously promote scientific and technological innovation and sustainable development. The company plans to further increase the investment in foreign trade market, to expand more international markets, to provide global customers with better quality products and services. This series of initiatives of BOGO Door & Window Hardware not only shows the company's firm determination and strong strength in foreign trade market expansion, but also lays a solid foundation for the company's future development. It is believed that in the near future, BOGO Hardware will bloom more brightly in the international market.

In today's rapidly changing science and technology, smart home has become the new style of modern life, and as an important part of the smart home smart doors and windows, is with its unprecedented intelligence, convenience and security, profoundly changing people's living experience. Among them, hardware accessories, as the core support of intelligent doors and windows, are leading the field towards a new stage of development, accelerating the intelligent transformation process of the entire doors and windows industry.   Hardware technology, smart future In recent years, with the continuous integration and application of the Internet of Things, big data, artificial intelligence and other technologies, the hardware fittings industry has ushered in an unprecedented wave of innovation. Traditional hardware fittings are no longer limited to simple switching and locking functions, but integrated with sensors, actuators, controllers and other intelligent elements, realizing real-time monitoring of the state of doors and windows, remote control, automatic adjustment and safety protection and other functions. The wide application of these intelligent hardware accessories not only improves the intelligent level of doors and windows, but also gives it the ability to “think” and “react”, making home life more convenient and safe. Innovation-driven, industrial upgrading In the face of the huge market demand, many hardware accessories enterprises have increased investment in R & D, and constantly launch intelligent products with independent intellectual property rights. From the fingerprint recognition of intelligent door locks, face recognition technology, to the windows of the intelligent sensor opening and closing, storm automatic closing system, each technological breakthrough marks the doors and windows hardware accessories to intelligent, integrated, personalized direction has taken a solid step forward. This innovation-driven development model not only promotes the transformation and upgrading of the hardware accessories industry, but also injects new vitality and power into the entire doors and windows industry.   Ecological construction, win-win cooperation The rapid development of intelligent door and window fittings has also driven the collaborative innovation and integrated development of the upstream and downstream industry chain. From the supply of raw materials, production and processing, to installation and commissioning, after-sales service, each link is changing to the direction of intelligence, standardization and service. At the same time, intelligent doors and windows accessories enterprises actively carry out in-depth cooperation with smart home platforms, Internet of Things enterprises, etc., to jointly build a smart home ecosystem, realize resource sharing, complement each other's strengths, and provide users with more comprehensive and convenient smart home solutions.   Look to the future, smart unlimited Looking to the future, with the continuous progress of science and technology and the continuous upgrading of consumer demand, intelligent doors and windows accessories will have a broader development prospect. On the one hand, with the in-depth application of 5G, AI and other technologies, intelligent doors and windows will realize more accurate and efficient interconnection, bringing users a more intelligent life experience; on the other hand, with the popularity of the green low-carbon concept, environmental protection, energy-saving intelligent doors and windows accessories will become the new darling of the market, promoting the development of doors and windows industry to a more green and sustainable direction. In short, the innovative development of hardware accessories is leading the intelligent doors and windows into a new era, accelerating the intelligent transformation of the entire doors and windows industry. We have reason to believe that in the near future, intelligent doors and windows will become an indispensable standard for every family, bringing more surprises and convenience to our lives.

Recently, China's intelligent doors and windows industry has come with good news, a series of intelligent doors and windows products equipped with advanced aluminum alloy fittings have made significant breakthroughs in the international market, and successfully won the favor and trust of many overseas customers. This not only marks that China's intelligent doors and windows technology has stepped into the international advanced ranks, but also demonstrates the strong competitiveness of Chinese enterprises in the global architectural hardware market. It is reported that these intelligent door and window products have successfully attracted customers from Australia, the United States, Canada, Southeast Asia and other countries and regions by virtue of their outstanding performance, exquisite craftsmanship and innovative aluminum alloy fittings design. These customers generally spoke highly of the products' intelligent control, energy-saving and environmental protection features, as well as their excellent safety performance. The success of intelligent doors and windows cannot be separated from the close collaboration of aluminum alloy accessories. As the core component of doors and windows, aluminum alloy parts not only concern the overall strength and stability of the product, but also directly affect the degree of product intelligence and user experience. In order to meet the high standard requirements of the international market, Chinese enterprises have invested a lot of resources in the research and development and production of aluminum alloy fittings, and continuously launched innovative products that meet international standards.   In the R&D process of aluminum alloy fittings, Chinese enterprises make full use of the power of modern science and technology to ensure that each piece of fittings can achieve the best performance through precise mold design, advanced production technology and strict quality control system. At the same time, the enterprise also actively cooperates with domestic and foreign well-known scientific research institutions to jointly carry out technical research and constantly break through technical bottlenecks to promote the technological progress of aluminum alloy fittings for smart doors and windows.   It is worth mentioning that China's intelligent doors and windows enterprises in the collaboration of aluminum alloy fittings also pay special attention to the environmental performance of the product. With the growing global attention to the concept of low-carbon environmental protection, more and more overseas customers are concerned about the environmental performance of door and window products. In order to meet this market demand, Chinese enterprises have adopted environmentally friendly materials in the production process of aluminum alloy fittings and optimized the production process to ensure that the environmental performance of the products reaches the international advanced level. In terms of market promotion, Chinese intelligent door and window enterprises have also shown strong strength and determination. They actively explore the international market by participating in international exhibitions, utilizing the Internet platform for publicity, establishing cooperative relationships with overseas agents and other ways. At the same time, the enterprises also according to the market characteristics and customer needs in different countries and regions, tailored to individualized marketing strategies and service programs, effectively enhancing the market competitiveness of products.   Looking ahead, China's intelligent doors and windows aluminum alloy fittings collaboration will continue to deepen and promote China's intelligent doors and windows industry in the global market to occupy a more important position. With the continuous progress of technology and market expansion, China's intelligent doors and windows products will bring more surprises and convenience to global consumers, and win more international praise for Made in China.

Globally, energy saving and emission reduction and sustainable development have become a consensus. Aluminum alloy doors and windows industry follows the pace of the times, through technological innovation, and constantly improve the environmental protection and energy saving performance of products. The application of broken bridge thermal insulation technology has brought a revolution in the field of building energy saving. Technical innovation, energy saving and environmental protection Aluminum alloy doors and windows industry actively responds to the call of green building, using advanced broken bridge thermal insulation technology, effectively isolate the indoor and outdoor heat transfer, reduce the energy consumption of the building. Compared with traditional windows and doors, aluminum alloy windows and doors with broken bridge thermal insulation technology have achieved a qualitative leap in thermal insulation performance.Broken bridge thermal insulation, reduce heat conduction Broken bridge thermal insulation technology through the aluminum alloy profile by adding special insulation materials, forming the connection between the internal and external parts, thus breaking the “bridge” of heat transfer, significantly reducing the heat conduction through the window and door frames. The application of this technology enables aluminum windows and doors to maintain good lighting and ventilation while also efficiently insulating against external high or low temperatures. Improvement of building energy efficiency With the wide application of bridge-breaking thermal insulation technology, the overall energy efficiency of buildings has been significantly improved. According to relevant research, aluminum alloy windows and doors with bridge-breaking insulation technology can reduce energy loss by about 30%, saving users a lot of energy costs, and at the same time, making a positive contribution to environmental protection. Market Response The market has responded enthusiastically to energy-efficient and environmentally friendly aluminum windows and doors. As consumers become more environmentally conscious, more and more homes and commercial buildings are choosing products that use this technology. Manufacturers of aluminum alloy doors and windows have also increased investment in research and development to promote the renewal of products. Broad prospects for the industry The development of the aluminum alloy doors and windows industry has broad prospects. With the continuous progress of technology and the continuous expansion of market demand, it is expected that in the next few years, the broken bridge thermal insulation technology will be more widely used in the field of aluminum alloy doors and windows, contributing more power to building energy saving. The application of broken bridge thermal insulation technology in the field of aluminum alloy doors and windows not only improves the performance of the product, but also makes an important contribution to the cause of building energy saving and environmental protection. With the continuous improvement of technology and further development of the market, the aluminum alloy doors and windows industry will usher in a more prosperous period of development. We call on more enterprises and consumers to pay attention to and adopt energy-saving and environmentally friendly aluminum alloy doors and windows products, and jointly promote the development of green buildings and contribute to the construction of a beautiful earth.

The foreign export market of hardware accessories is an area full of opportunities and challenges.According to the analysis of Huajing Industry Research Institute, the global hardware market is expected to reach US$261 billion by 2027, with a CAGR of 5.6%.China, as an important country in global hardware fittings export, reaches $78 billion in 2022, accounting for nearly 30% of the global market .In the process of foreign trade export, hardware fittings enterprises need to pay attention to several key points.First of all, the diversification of market demand requires enterprises to provide window hardware products that meet the specific needs of different markets.For example, the U.S. market may prefer high-quality and environmentally friendly products, while the Southeast Asian market may be more price- and cost-conscious.Secondly, the uncertainty of trade policies, such as the trade friction between China and the United States and the Green New Deal in Europe, may increase the complexity of exports .In addition, the competition in the international market is intensifying, and countries such as India and Vietnam are strengthening the development of hardware industry .In order to effectively promote and expand foreign export business, aluminium  hardware fittings enterprises can adopt various strategies.     The use of digital marketing tools, such as search engine optimization (SEO), social media promotion and content marketing, can enhance the visibility and competitiveness of enterprises in the international market .At the same time, participating in international exhibitions and cooperating with local channels are also important ways to enhance market penetration .In terms of product quality and standards, enterprises need to adjust their products according to the regulations of different countries in order to meet the quality     requirements of their target markets.For example, some African countries may prefer relatively inexpensive accessories, while developed countries may impose stricter quality standards .This requires enterprises to flexibly adjust their production lines to meet the needs of different markets.In short, foreign export enterprises of hardware fittings need to continuously innovate and optimize their products like door handle and services, actively respond to market changes, and make use of digital tools and international cooperation in order to maintain their competitiveness in the global market.  

In China's door and window hardware industry, Bogo Hardware, as a leading brand, is actively responding to the development trend of national intelligent buildings and accelerating the opening of a new era of smart accessories. With the release of the "Intelligent Building Design Standards (Partial revision draft)", China's construction industry is moving towards an intelligent era, bringing opportunities for transformation and upgrading to the door and window hardware industry. Through the construction of intelligent manufacturing industrial system, the introduction of intelligent numerical control equipment, with big data, artificial intelligence and other new technologies to create a "smart factory", to achieve intelligent, standardized and large-scale production of products, effectively improve the quality of products and market competitiveness.   In addition, the door and window hardware industry is facing the trend of market demand to the development of high-end products, with the improvement of people's living standards, the increasing demand for energy-saving, environmental protection, safety, durable and other functions of doors and Windows, promoting the development of high-end door and window hardware. At the same time, the state's advocacy of green buildings and the improvement of energy conservation and environmental protection standards have brought lasting and comprehensive development opportunities for the system door and window hardware industry.   In terms of market competition pattern, the door and window hardware industry presents a multi-level competition pattern, foreign brands rely on its first-mover advantage and brand influence in the tooling market, and occupy a part of the market share in the high-end products. Domestic and local enterprises rely on technological innovation and product localization advantages to gradually establish brand advantages. With the consolidation of the industry, the market share will gradually focus on large door and window hardware enterprises with strong R & D strength, strong product innovation ability, good product quality and high brand influence.   Overall, China's door and window hardware industry is in a critical period of rapid development and transformation and upgrading, enterprises need to grasp the market trend, strengthen technological innovation and brand building, in order to adapt to the changing market demand.   In terms of new improvements, the company pays attention to product quality and innovation, and is committed to providing high-end door and window hardware accessories and overall solutions. The company uses a high standard of raw material selection and production process to ensure the durability and beauty of the products. For example, in the use of zinc alloy materials, Blocko insists on the use of new materials, and strictly controls the proportion of nozzle materials within 15% to ensure product life.   In terms of the company's new process, Bogo Hardware actively participates in industry exhibitions, such as China Construction Expo, to show its new products and brand image. The company also released a new LOGO, from small to capital changes, in order to highlight the national brand confidence and high luxury, the image is more stable, more historical sense. In addition, Bogo Hardware also launched a CRM project to optimize the customer management system to enhance the core competitiveness of the brand.   Through continuous technological innovation and product research and development, Bogo Hardware has become a well-known brand in the field of aluminum door and window home improvement, and has won many honors, such as "China's top Ten lock brands" and "China's top Ten aluminum door and window hardware brands". The company's products are not only recognized in the domestic market, but also have gone to the international market, providing high-end aluminum door and window accessories and overall solutions for global users.