The installation of pulleys for aluminum alloy door and Window Accessories requires attention to some details. Only correct installation can achieve better results. Before installing the pulleys, you need to check whether the tracks and pulleys of the door and window are damaged or seriously worn. If necessary, repair or replace them first.
First, install the pulley shaft in the slide groove of the door and window, ensuring that the axis is parallel to the door and window. Then, leave some clearance on the pulley fixing screw to allow the pulley to rotate smoothly. Note that the fixing screws must be made of the same material as the doors and windows to ensure a secure installation.
Next, install the pulley mechanism onto the bracket. Pre-install the pulleys on the pulley assembly, making sure the pulley assembly is parallel to the door or window. Then, install the pulley assembly into the corresponding position and use the correct set screws to secure it stably. It is important to note that the fixing screws must be tightened one by one to ensure that the pulley device does not tilt.
Finally, perform the pulley test. Gently push and pull the door or window a few times to check that the pulley rotates smoothly without binding or friction. If necessary, you can apply some lubricating oil between the pulley and the track to reduce friction and improve smooth sliding.
In short, the correct installation of pulleys- Door Hardware plays a vital role in the normal operation of aluminum alloy doors and windows. During the installation process, pay attention to some details and check the installation effect to ensure that the doors and windows open and close smoothly. If you are not sure how to install the pulley, it is recommended to ask a professional to avoid unnecessary losses.
<iframe width="447" height="795" src="https://www.youtube.com/embed/RZMVVVV9ugM" title="the birth of BOGO pulley #accessories #hardware #slidingdoor #aluminium #pulley #chinamanufacter" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>